The unique TRC1000 is a 100% scale replica of the most popular Garmin 1000 and Garmin 900 (G1000 and G900) Glass Cockpit Systems as found in many modern aircraft. The display functionality is supported by Microsoft's professional Simulation Platform ESP, by Flight Simulator FSX and (with additional software packages from third parties) for Microsoft FS9.

The hardware is produced from quality ABS using plastic injection molding and high quality electronics.

All buttons and rotary encoders work as you expect them to do, even the Joystick function on the right hand side of the PFD and MFD bezel is implemented (the functioality of rotaries and buttons is limited to the functionality available in Microsoft FSX). The high resolution TFT screens of the PFD and MFD displays can be connected to additional video ports on your PC. However, you do not need video ports (VGA) at your computer. The MFD and PFD displays each have a single USB connection, through which connection the control of the knobs, pushbuttons, SD Card interfaces and the video information is accomplished. Upon your chocie, you can connect an additional VGA output on your PC for each Display Unit, or you can connect the video information via USB. A driver (included on CD) adds 2 additional video screens to your desk top computer or note book running Windows XP or Vista.

Each display unit (PFD or MFD) has 2 SD Card slots, which are recognized by the computer connected as 2 additional disk drives. 4 SD Cards of 1 Gigabyte are included in the complete system.

A complete TRC1000 system includes 2 main displays and one Audio Panel. The set includes therefore:

1 PDF Display Unit with 800x600 screen

1 MFD Display Unit with 800x600 screen

1 Audio Panel

2 Power Supplies

4 SD Cards 1Gb

3 USB Cables

Set of screws for mounting the modules

2 additional bezel covers with 11 positions for buttons

2 additional blank bezel covers

Installation files to display the GPS1000 images on the TFT screens

Each display unit comes with all buttons for a.o. the Autopilot in position. Even the VNV Key (Vertical Navigation Mode) is available. You can replace the bezel on the left side of each module for a bezel with either 11 button positions or for a bezel with no button positions at your choice. The extra bezels are included in the package. No special tools are needed for this replacement.

Download the full color brochure in PDF format (size: 5,9 Mb).

Software Development Kit
The TRC1000 is a so-called HID-device. This means that no special low-level drivers are necessary to interface the buttons and rotaries information to your PC. Upon request information is available how to read the information of rotaries and buttons. Interfacing to self-written BASIC or "C" programs is therefore quiet easy.